Junkman707
New member
Trying to install my second PS1 Digital. HDMI gets a link (solid blue led) but the screen is just black.
Putting the PS1 Digital into my first modified PU-18 with PS1 Digital (basically swapping the PS1 Digital PCBs) the black screen follows the PCB and not the PU-18.
Under full disclosure I did have to remove the GPU flex (hot air) and put some kapton tape over the vias to remove the shorts.
Wondering if that might have damaged the PS1 Digital somehow. Seems likely; but not sure which components to check on the PS1 Digital to get it working again?
Current plan is to get a replacement flex (messed up the Audio Flex) and make sure the working PS1 Digital works in both PU-18s I have.
Putting the PS1 Digital into my first modified PU-18 with PS1 Digital (basically swapping the PS1 Digital PCBs) the black screen follows the PCB and not the PU-18.
Under full disclosure I did have to remove the GPU flex (hot air) and put some kapton tape over the vias to remove the shorts.
Wondering if that might have damaged the PS1 Digital somehow. Seems likely; but not sure which components to check on the PS1 Digital to get it working again?
Current plan is to get a replacement flex (messed up the Audio Flex) and make sure the working PS1 Digital works in both PU-18s I have.