With regards to the audio ffc, I am getting continuity on the following pins using a multimeter/continuity tester:
pin 2 (+5v) and pin 4 (nc)
pin 2 (+5v) and pin 7 (nc)
pin 4 (nc) and pin 7 (nc)
Should this be happening? I am certain my soldering is fine (see photo) and the only issue I've had is the video ffc which I am due to fix but the audio is perfect..
Many Thanks
pin 2 (+5v) and pin 4 (nc)
pin 2 (+5v) and pin 7 (nc)
pin 4 (nc) and pin 7 (nc)
Should this be happening? I am certain my soldering is fine (see photo) and the only issue I've had is the video ffc which I am due to fix but the audio is perfect..
Many Thanks
Attachments
-
567.9 KB Views: 16