Recent content by bpellin

Thanks for that suggestion. I was able to bring up the OSD. Originally: I think my problem was that I was looking for a single pin that had a poor connection, not 12. I reworked those pins, and it is looking good:

I still can't get the test pattern to show on my display. Maybe my displays just don't like that signal. I touched up the hsync and vsync pins on the GPU flex and the 5V pin on the audio flex, and I'm getting video and audio through HDMI now. The colors are off through HDMI. I'm getting too...

I added one to the album: https://photos.app.goo.gl/WZUx1Wogo4N41yV18 I'm happy to take more if it helps.

I added a couple photos here: https://photos.app.goo.gl/WZUx1Wogo4N41yV18

Hello, When I power on the playstation, I get a pulsing light on the PS1Digital, but no HDMI output signal. I tested with my multi-meter on the ps1 digital, I get 3.3V and between 4.8-4.9V on the 5V line (is that within tolerance?). Analog audio and video work correctly. I was not able to get...

The sync regeneration setting didn't help. I did go through and start toggling all of the settings in the OSD. I had line doubler set to true. When I turned that off it started working correctly. Thanks for your help!

The Wii is set to 480i in the Wii settings menus. I also tried composite video and that is working too. So, it's just the component on my SD TVs that isn't working.

Some more info. I tried connecting with component to my HDTV and it worked correctly. However, I've tried on 2 SD TVs with component inputs and I get a picture like the one in the video in my first post. The WII was working on component on the same TVs prior to installing the mod. Is there...

I installed my Wii Dual. HDMI is working for me, but component video is not working. I get an image that looks like this (also contains some images of my installation): https://photos.app.goo.gl/boDqYxHRftQ6XxVD6 Sync seems off. I've been poking around with my multi-meter looking for a bridge...