Ripped pad on Audio board. How to jump?

modzvilleusa

New member
Screenshot_398.jpg
Hey guys, I'm working on my first DCHDMI install. I haven't fired it it up yet. Tested every joint with multimeter and it should fire up no problem.
Only issue is that the pad circled in this picture flowed right off the flex cable. Does anyone know where I can jump this pin to the flex cable to bypass the pad or if this pin is even in use.
Looking at the flex cable, it doesn't appear to have a trace connected to it but I'd like to be sure before I proceed.
Thanks for your time.
 
Top