Incorrect colors/washed out image after installing.

RenzokuFC

New member
OSD works fine and the LED is solid blue, but the DC's video is washed out and there's no sound.
I check for shorts, changed the monitor, the cables and the problem persist.

Also, no image on analog.

Any ideas on where did I screwed up the installation?

Thanks in advance.
 

citrus3000psi

Administrator
Staff member
The video might looked washed if you are in cable detect mode. Switch to ForceVGA.

Go over all the solder points on the flex with a multimeter and look for shorts adjacent to each other.
 
Top