PowrUpGaming
New member
Wondering if anyone could help me out with this. I have a DCDigital on f/w 4.4 std that I wont connect to Wifi nor update it's f/w. I can connect to it's access point through web console tho. Things I've noticed are that it takes about 30sec after startup to be able to open the OSD. Other than not being able to update it works. I'm stuck on this one. Here are the things I've tried.
1. Removed GDEMU, modem and replaced w/ GDROM drive
2. Reflowed to 2 connections on the flex cable as shown in the DCDigital troubleshooting section
3. Manually flashing f/w thru web console fails w/ error message "Error reading original checksum"
4. Cleanup command gives me "FAILED: Remove firmware files."
5. Flashfpgasecure command gives me "Error starting flash process!"
5. spi_flash_erase command gives me "Error starting flash process!"
1. Removed GDEMU, modem and replaced w/ GDROM drive
2. Reflowed to 2 connections on the flex cable as shown in the DCDigital troubleshooting section
3. Manually flashing f/w thru web console fails w/ error message "Error reading original checksum"
4. Cleanup command gives me "FAILED: Remove firmware files."
5. Flashfpgasecure command gives me "Error starting flash process!"
5. spi_flash_erase command gives me "Error starting flash process!"