Recent content by Burnz

  1. B

    Problem with no audio despite all tests passing

    I grabbed the digital audio lines from the adjacent IC303 and connected them to ADAT ABCK and ALRK (with 75 ohm resistors) as shown in Citrus' post. It worked! I will test everything with a new flex cable soon, but until then I'm happy that it works.
  2. B

    Problem with no audio despite all tests passing

    Thanks a lot!!
  3. B

    Problem with no audio despite all tests passing

    Hi, unfortunately I have the exact same issue. No audio despite having continuity on the pins for audio. Does anyone have a clue where certain pins from the 315-6232 have to go to the dchdmi board ? I would like to solder wires directly from the chip to the board to check if there is a problem...
  4. B

    Video lost 5 seconds after boot

    Hey, I have had an issue like this after doing the fan mod, because I forgot to add an 10k ohm resistor across 5v and tach line.
See more
Top